Emergency Shower and ABS Plastic Eyewash Bowl Combination Station
This combination eyewash and shower safety station is used in incidents where rapid full body wash or eye rinse is required. The two GS-Plus spray-type outlet heads deliver a flood of water for rinsing the eyes.
- Shower Head: 10" diameter orange ABS plastic
- Shower Valve: 1" IPS chrome-plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon seals. Furnished with stainless steel actuating arm and 29" stainless steel pull-rod
- Spray Head Assembly: Two GS-Plus spray heads. Each head has a "flip-top" dust cover, internal flow control and filter to remove impurities from water
- Eyewash Bowl: 11-1/2" diameter, stainless steel
- Eyewash Valve: 1/2" IPS chrome-plated brass stay-open ball valve. Valve is US-made with chrome-plated brass ball and Teflon seals
- Pipe & Fittings: Schedule 40 galvanized steel. Furnished with orange polyethylene covers for vertical piping for high visibility and corrosion resistance
- Supply: 1-1/4" NPT female top or side inlet
- Waste: 1-1/4" NPT female outlet. Outlet can be positioned at either 9-1/4" or 19-5/8" above finished floor by reversing lower pipe nipples
- Sign: Furnished with ANSI-compliant identification sign
- Quality Assurance: Valve and spray head assemblies are factory assembled and water tested
- Shower Head: 10" diameter orange ABS plastic
- Shower Valve: 1" IPS chrome-plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon seals. Furnished with stainless steel actuating arm and 29" stainless steel pull-rod
- Spray Head Assembly: Two GS-Plus spray heads. Each head has a "flip-top" dust cover, internal flow control and filter to remove impurities from water
- Eyewash Bowl: 11-1/2" diameter, stainless steel
- Eyewash Valve: 1/2" IPS chrome-plated brass stay-open ball valve. Valve is US-made with chrome-plated brass ball and Teflon seals
- Pipe & Fittings: Schedule 40 galvanized steel. Furnished with orange polyethylene covers for vertical piping for high visibility and corrosion resistance
- Supply: 1-1/4" NPT female top or side inlet
- Waste: 1-1/4" NPT female outlet. Outlet can be positioned at either 9-1/4" or 19-5/8" above finished floor by reversing lower pipe nipples
- Sign: Furnished with ANSI-compliant identification sign
- Quality Assurance: Valve and spray head assemblies are factory assembled and water tested